Don't miss our holiday offer - up to 50% OFF!
Lens Point LED Luminaire For Road And Street Lighting Rating – 120 Watt
Original price was: ₹15,999.₹3,949Current price is: ₹3,949.
- LED Rating (in Watts)/ System Wattage/ Rated Power – 120W
- LED luminaire luminous Efficacy (Lumen/watt) (Hint: Total Lumen Calculation: Example: 18 W LED Rating x 100 Lumen/Watt = 1800 Lumens, 18 W LED Rating x 120 Lumen / Watt = 2160 Lumens, 18 W LED Rating x 140 Lumen/Watt = 2520 Lumens) – 100
- Input operating voltage range and frequency – 140 to 270 Volts AC at 50 Hz +/-2
- Number of electronic control gear in the luminaire (power supplies) – 2
- Provision of luminaire connecting wire along with the supply of material – 50 cm (ISI marked to IS 9968)
- Warranty for free replacement (in years) – 4
| STANDARDS | |
|---|---|
|
Description of the stores |
LED Luminaire For Road And Street Lighting |
|
Conformity of the specification |
Conforming to IS 10322 (Part 5/Section 3) and Particular Requirements for LED Street Lighting Luminaire conforming to IS 16107 (Part 2/Section 2) |
|
Type of luminaire [Ref. Cl. 1.1 of IS 16107(Part 2/Section 2)] |
Type B |
|
Photobiological safety of LEDs (Ref. IS 16108) |
Exempt Group |
|
BIS CRS compliance for LED luminaire for road and street lighting |
Compliance to IS 10322/Part 5/Section 3 |
|
BIS CRS Number – Must declare |
91017701 |
| LUMINAIRE | |
|---|---|
|
Construction of Luminaire |
Luminaires casing/housing (single piece housing): Pressure die casted aluminium alloy with higher thermal conductivity, The luminaire body: Corrosion resistant powder coated, Heat sink: The heat sink provided with die-cast aluminium along with sufficient heat sink fins to dissipate heat effectively, Material of the fasteners: Stainless steel (Grade – 304), MCPCB provided with FR4 grade minimum 0.8 to 1.0 mm thick or more, Driver components: Industrial grade, Light Source: SMD LED Chip as per LM 80, Soldering point temperature: Not exceed 85 deg C at ambient temperature 25 deg C |
|
Construction of Luminaire Body |
Moulded / Extruded silicon loop gasket provided in the luminaire body to ensure a weatherproof seal between the UV Glass cover and the metal housing to exclude the entry of dust, water, insects, etc., and the Luminaries cover material provided with Clear Toughened glass with 4 mm thick /Clear Polycarbonate. The Optical cover material not get discoloured and not suffer degradation due to heat and ageing within the warranty period. Suitable connector is provided for LED connection between driver output and LED, Capacitor rated temperature is > / =105 deg C |
|
Provision of luminaire connecting wire along with the supply of material |
50 cm (ISI marked to IS 9968) |
|
Minimum operating temperature |
-10 deg C |
|
Maximum operating temperature |
+50 deg C |
|
Operating Humidity Range |
10 % to 95% RH |
|
Additional requirement |
NA |
| ELECTRICAL CHARACTERISTIC | |
|---|---|
|
Rated voltage / Luminaire works on |
220 V, 50 Hz, AC / Single phase three wires system (Phase, Neutral and Earth) |
|
Input operating voltage range and frequency |
140 to 270 Volts AC at 50 Hz +/-2 |
|
Automatic higher cut off voltage |
Above 300 Volt |
|
AC power factor at full load |
≥ 0.90 |
|
Total Harmonics Distortion |
≤ 20 % |
|
Colour Rendering Index(CRI) |
≥ 70 |
|
LED Beam Angle |
≥ 120 |
| MARKING | |
|---|---|
|
Marking requirements for the LED Luminaire |
Manufactures name and brand on the aluminium die cast body :Engraved/Embossed, Manufacturer’s name, model number, serial number on the Luminaire, Date of manufacture (month-year), and lot number as identification mark inside of each unit and the outside of each packaging box, Operation characteristics voltage and power be marked inside of each LED luminaire unit |
|
Diameter of pole luminaire suitable for [(up to 45W: the Pole OD shall be 40mm), (>45W<120W: the Pole OD Shall be 50 mm), (above 120W: the pole OD shall be 60 mm)] |
Yes |
|
LED Make |
OSRAM / NICHIA / CREE / SAMSUNG / SEOUL / LUMILEDS / PHILIPS / SYSKA / LUMENMAX / EVERLIGHT / EDISON / BRIDGELUX / NATIONSTAR / REFOND/APT |
| PROTECTION | |
|---|---|
|
Protection of the entire housing (both LED section and driver section) as per IS 10322 (Part 1) |
IP 66 |
|
Other protection |
Output Short Circuit Protection, Output Overload Protection, Input Over Voltage Protection, Input and Output Reverse Polarity and as per IS 10322/Part 5/Section 3 |
|
The luminaire protected against surges and transients, Internal, (in KV, Minimum) |
5 |
|
The luminaire is protected against surges and transients, External, (in KV, Minimum) (hint: In case of no protection select “0”) |
10 |
| REPORTS AND CERTIFICATIONS | |
|---|---|
|
Warranty for free replacement (in years) |
4 |
|
EMI/EMC compliance as applicable |
No |
|
Availability of LM 79 (Photometry) report (Ref IS 16106) from Central Government Lab /NABL accredited/ILAC accredited lab (LM-79 report shall contains total lumen output, power, PF, Current in Amps, CRI & CCT, etc) |
Yes |
|
Availability of LM 80 and TM 21 (Ref IS 16105) report and Photo biological report for LED from Central Government Lab /NABL accredited /ILAC accredited lab (LM-80 report shall contain Photo Biological report) |
Yes |
|
Availability of test report for luminaire from Central Government Lab /NABL accredited /ILAC accredited lab to prove conformity of the specification |
Yes, As per IS 10322/Part 5/Section 3 and IS 16107/Part 2/Section 2 |
|
Agreed to furnish all the test reports and certificates to buyer on demand |
Yes |
Be the first to review “Lens Point LED Luminaire For Road And Street Lighting Rating – 120 Watt”
Reviews
There are no reviews yet.